Felt and Wire Guiding System – Abhi Industrial Corporation https://abhiindustrial.in Machinery Parts for Paper Making Machines Sat, 29 Apr 2023 06:00:42 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://abhiindustrial.in/wp-content/uploads/2023/04/ABHI-new-LOGO-icon-100x100.png Felt and Wire Guiding System – Abhi Industrial Corporation https://abhiindustrial.in 32 32 Lever-Arm Type Wire Stretcher https://abhiindustrial.in/product/lever-arm-type-wire-stretcher/ Sat, 29 Apr 2023 05:55:43 +0000 https://abhiindustrial.in/?post_type=product&p=5152
  • Lever-arm type stretching system is used in the area of the wire section for wire tension.
  • Lever-arm type stretching systems can be freely mounted in terms of position.
  • Parallel adjustment of the stretch roll via self-locking trapezoidal threaded spindle, vibration-free.
  • Lever-arm type stretcher reduces the wire abrasion thanks to reduced slip between the wire and the guide rollers.
    • ]]>
  • Lever-arm type stretching system is used in the area of the wire section for wire tension.
  • Lever-arm type stretching systems can be freely mounted in terms of position.
  • Parallel adjustment of the stretch roll via self-locking trapezoidal threaded spindle, vibration-free.
  • Lever-arm type stretcher reduces the wire abrasion thanks to reduced slip between the wire and the guide rollers.
    • ]]>         Felt Stretcher https://abhiindustrial.in/product/felt-stretcher/ Tue, 25 Apr 2023 06:32:28 +0000 https://abhiindustrial.in/?post_type=product&p=5129 Felt Stretcher is available in 3 Types
    1. Manual Felt Stretcher
    2. Motorized Felt Stretcher
    3. Automatic Felt Stretcher
    • These felt stretchers are equipped with two worm & worm wheel-type gearboxes connected by a cross shaft.
    • The two gliding brackets with the spindle nut are carrying the tension roll bearing assembly which is driven by the threaded self-locking spindle and sliding on profiled pipes.
    • Customization can be done with the dimensions of the spindle and the pipes as per the requirement.
    • Felt stretchers are available with working lengths from 800 mm to 2000 mm.
    • The Stretchers can be driven manually with a handwheel, or electrically with a gear motor.
    ]]>         AUTOMATIC STRETCHERS WITH LOAD CELL https://abhiindustrial.in/product/automatic-stretchers-with-load-cell/ Tue, 25 Apr 2023 06:14:01 +0000 https://abhiindustrial.in/?post_type=product&p=5126 Can be installed in the drying/wet section. Highly compact and can be installed in any position. Made in stainless steel or painted steel. Available standard 800-1000 mm strokes and various sizes according to the machine width. Inserted into the line for the production of paper, its specific function is to maintain the tension of the wire/felt during the sliding phase of the paper, in non-stop production.]]> As the wire/felt becomes loose, the load cell installed in the wire/felt circuit or installed on the stretcher detects the tension and sends the signal to the PLC of the control panel which moves the tensioning roll until the wire/felt automatically returns to the set tension.

    The correct tension of the wire/felt improves the quality of the paper.

    Our tensioners/stretchers are built for heavy-duty operations & are easy to operate even under harsh conditions. It ensures exact roll positioning with a thread spindle drive.

    Specialty:

    1. Precisely designed by experts
    2. Excellent quality
    3. Reliable performance
    4. Longer life
    ]]>         Felt & Wire Run-off Alarm https://abhiindustrial.in/product/felt-wire-run-off-alarm/ https://abhiindustrial.in/product/felt-wire-run-off-alarm/#respond Mon, 17 Apr 2023 11:47:35 +0000 https://abhiindustrial.in/?post_type=product&p=5118 Run-off alarms are installed in pairs on the front and drive side and warn if a felt or wire runoff is imminent. Inductive switches are used on the wet end, while on the dry end, mechanical switches that are heat- resistant to 150°C, are used. The electrical signals can be used by the machine control system as an alarm for the operator or to shut off the drives]]> Function & Application
    • Protection sensor for each position on paper machine
    • Paired installation on the front and drive side
    • Reliable switches
    • Suitable for all positions

    Benefits

    • Safety operation
    ]]>     https://abhiindustrial.in/product/felt-wire-run-off-alarm/feed/ 0     Pneumatic Edge Sensor – SPV https://abhiindustrial.in/product/pneumatic-edge-sensor-spv/ https://abhiindustrial.in/product/pneumatic-edge-sensor-spv/#respond Mon, 17 Apr 2023 11:37:54 +0000 https://abhiindustrial.in/?post_type=product&p=5116 Type: Slide Piston Valve (SPV) SPV Type Model 1 Control valve assembly with small area : 1 mm (± 0.5 mm), Model 2: Control valve assembly with large dead zone: 5 mm (±2.5 mm), e.g. for use in the dry section. Both types have an operating range of ±18°. This range corresponds to an operating range of approx. +65 mm at the recommended contact point on the edge of the belt.]]> Uses

    The mechanical-pneumatic edge sensor SPV Type is only to be used

    in conjunction with pneumatic actuators. It acquires the position of the edge of felt/wire belts in paper machines.

    Only use the edge sensor

    – In correct working order,

    – As intended,

    – Taking into account the description.

    ]]>     https://abhiindustrial.in/product/pneumatic-edge-sensor-spv/feed/ 0     Pneumatic Edge Sensor – RPV https://abhiindustrial.in/product/pneumatic-edge-sensor-rpv/ https://abhiindustrial.in/product/pneumatic-edge-sensor-rpv/#respond Thu, 13 Apr 2023 11:04:36 +0000 https://abhiindustrial.in/?post_type=product&p=5111 Edge sensor RPV Type is purely Pneumatic, its operation is based on rotary piston principle. A rotary piston opens in the air supply to the respective cylinder chamber proportionally to the position of the sensor paddle. At the same time the venting passage to the opposite cylinder chamber is opened. The value is completely closed when the mid- way position. In this case air is required for the positioning movements only.]]> Edge sensor RPV Type is purely Pneumatic, its operation is based on rotary piston principle. A rotary piston opens in the air supply to the respective cylinder chamber proportionally to the position of the sensor paddle. At the same time the venting passage to the opposite cylinder chamber is opened. The value is completely closed when the mid- way position. In this case air is required for the positioning movements only.]]> https://abhiindustrial.in/product/pneumatic-edge-sensor-rpv/feed/ 0 Felt & Wire Autoguide – Bellows Type https://abhiindustrial.in/product/felt-wire-autoguide-bellows-type/ https://abhiindustrial.in/product/felt-wire-autoguide-bellows-type/#respond Thu, 13 Apr 2023 10:07:05 +0000 https://abhiindustrial.in/?post_type=product&p=5109 Advantages: 1. Avoid Fabric runoff 2. Minimize fabric edge wear 3. Reach Maximum fabric wear life 4. Reduce sheet breaks 5. Optimize paper productivity]]> Salient Features:

    1. Immediate response to any movement of the clothing in the cross-machine direction without overcompensation

    2. Very few moving parts and little need for maintenance work.

    3. Moving parts are fully enclosed for complete protection against water, fiber, and dust

    4. Extremely low air consumption, normal working pressure @ 3.0 kg/cm2

    5. Suited for installation in any position- horizontal, vertical, inclined, or even upside down. 6. Easy to install and operate.

    7.No adjustment required before start-up

    8. Built-in manual override

    ]]>     https://abhiindustrial.in/product/felt-wire-autoguide-bellows-type/feed/ 0     Felt & Wire Autoguide – Cylinder Type https://abhiindustrial.in/product/felt-wire-autoguide-cylinder-type/ https://abhiindustrial.in/product/felt-wire-autoguide-cylinder-type/#respond Mon, 10 Apr 2023 13:02:59 +0000 https://abhiindustrial.in/?post_type=product&p=5010 The Pneumatic Autoguide System (Piston Type) are designed for use in wire, press and dryer section of paper machines. All piston guides have a compact, enclosed design.]]> Features:

    The portion of the sensing palm that comes in contact with the fabric is fitted with a ceramic-coated strip thus giving a very long life to the palm and it also avoids any damage to the fabric due to wear on the sensing palm.

    Suitable for wires, felts & dryer fabrics

    Normal working pressure @ 3.0 Kg/cm2

    Adjustable stroke, maximum stroke ±45mm / ±60mm on either side

    Returns to central or present position in the event of air system failure

    Built-in manual override.

    Advantages:

    1. Robust, enclosed design

    2. Mechanical feedback unit for excellent guiding results

    3. Low internal friction

    4. Flexible mounting position

    5. Maintenance friendly

    ]]>     https://abhiindustrial.in/product/felt-wire-autoguide-cylinder-type/feed/ 0